Introducing New Practical Features in the Cisco UCS Platform Emulator 3.1(2ePE1)

melissa • February 08, 2018 • No Comments

If you have ever worked with Cisco UCS, or thought about it, the Cisco UCS Platform Emulator, also referred to as UCSPE is a true asset. In short, the UCS Platform Emulator allows you to run a virtual hardware environment to enable you to play with some of the key features and functionality of UCS Manager. If you are looking for a good walkthrough on how to get started with the Cisco UCS Platform emulator, be sure to check out my guide here.

If you have been keeping score, the Cisco UCS Platform Emulator 3.1(2bPE1) was released at the end of 2016, and lastd throughout 2017. Very recently, Cisco released the UCS Platform Emulator 3.1(2ePE1). This is a patch release to 3.1(2bPE1), and as Cisco even states on their UCSPE site, all in all it is a minor update.  You can also find historical versions of the Cisco UCS Emulator at the site.

While the changes are minor, the fact is they are very important to a number of users. Now, let’s take a look at the most practical features in this release of the Cisco UCS Emulator, and why they are so very important.

The Rise of the Cisco UCS S3260

If you are interested in the Cisco UCS S3260, this update is for you. It adds new features to the emulated platform, including storage profiles. To go along with this, there are new equipment templates, and new chassis templates. This helps users get started quickly with a custom virtualized equipment template.

Remember, the S3260 is a chassis capable of supporting up to two compute nodes, which means it behaves more similarly to the UCS 5018 chassis than a C-Seires rack mount server within the UCS Platform Emulator environment. This is why these new templates are so helpful to get up and running quickly.
cisco ucs platform emulator s3260 chassis

Ease of Use

While UCSPE is not difficult to use when you have Cisco UCS experience, some may find it daunting at first. In addition to the new templates we just mentioned, the default hardware configuration was updated to reduce some of errors and warnings once users have logged into UCS Manager.

For those looking to use the Cisco UCS 6248 Fabric Interconnects, a new virtual equipment configuration has been provided along with the UCSPE download. This configuration can be imported into the UCS Platform Emulator instead of switching the Fabric Interconnect configuration manually. If you need a different Fabric Interconnect model than the 6248 or the default 6332-16UP you can find the instructions to switch the FI model here.

If you are looking to evaluate the S3260 in particular, these updates will go along way in the usability for the UCS Platform Emulator for you. You can also watch a demo of the S3260 in UCSPE here.

If you are looking to update from a pervious version of UCSPE to 3.1(2ePE1), be sure to take a look these helpful tips.

You can find UCSPE 3.1(2ePE1) on the official Cisco UCS Platform Emulator site.

As always, here is the disclaimer I always include when talking about UCSPE:

Disclaimer: Your UCS Manager configuration is lost across reboots of the emulator appliance, please make sure you have backed up your UCS Manager configuration!

Are you new to the Cisco UCS emulator?  Be sure to read through these articles to help you get started:

Setup and Use of the Cisco UCS Platform Emulator

Tips and Tricks for Using the Cisco UCS Platform Emulator

Updating Your UCS Platform Emulator

Changing Fabric Interconnects on the UCS Platform Emulator

Categories Cisco